Ask A Question

Welcome to Home improvement answers from the experts, where you can ask questions and receive answers from other members of the community.

Get help


Articles

Interview with Will Lingard – Pro Handyman from the UK
In this episode, I had the opportunity to inter...
14 November 2024, 6:01 pm
The power of low expectations part 2: Simple tips for less stress and more fun
Owning a business has many benefits. It gives y...
15 October 2024, 1:45 pm
The power of low expectations
In “Same as Ever,” Morgan Housel shares how...
19 September 2024, 5:32 pm
My top five least profitable handyman jobs
As a professional handyman, I’ve completed ma...
13 August 2024, 6:36 pm
Growing a business the easy way
How would you like to know an easy way to grow ...
18 July 2024, 5:58 pm

Why is window cracking?

+0 vote
1346 views
I’m looking for some thoughts on what might be causing my Andersen window to crack. This is a double-hung window and it is the upper section that cracks. I already changed it once and it cracked again. I did some reading and found that it might be a thermal stress crack due to temperature changes. The house is a raised ranch and the window is in the lower section of the knee-wall in the middle of the house. The house does get a lot of sun, but there is a bush in front of the window and there is also 18” overhang for the upper section of the house. I mention this since articles about thermal stress cracks state that shadows and heat transitions are the cause. I also read that there is really no way to stop this from happening. In any case, before I change the window again I wanted to get some different opinions. There is another thing that I was thinking might be causing the issue. When the window was installed it was secured from the outside using the flanges on the window. However, on the inside it was also shimmed on both sides and the top since pine trim jambs were needed to accommodate a 2X6 wall. I checked and the shims go all the way in the gap against the side of the window and not just where the pine jamb was added. So, could it be that the window being shimmed is causing the problem and not allowing for expansion and contraction? Should Andersen windows be shimmed at all on the inside? I know the shims are needed behind the pine jamb, but these shims go all the way in. I can send pics if needed. Thanks asked 01/08/2017 in Windows by L P

Your answer

LATEST SHOP ITEMS

...

Oak and Walnut Multi tone Buffet with 3 Drawers

...

32" Dark Grey Fabric and Metal Bench

...

12V Jaguar F-Type SVR Licensed Kids Ride On Car-Navy

...

330 lbs Aluminum Folding Non-slip Drywall Step Stool Ladder

...

Recliner Chair Swivel Rocker Manual Single Sofa Lounger with Footrest-Black

...

360? Rotatable Armoire 2-in-1 Lockable Mirrored Jewelry Cabinet-Brown

Albany |  Albuquerque |  ALL orange county |  Atlanta |  Austin |  Baltimore |  Birmingham |  Boston |  Buffalo |  Charlotte |  Chicago |  Cincinnati |  Cleveland |  Columbia |  Columbus |  Denver |  Detroit |  Grand Rapids |  Greensboro |  Greenville |  Harrisburg |  Hartford |  Honolulu |  Houston |  Indianapolis |  Jacksonville |  Kansas City |  Knoxville |  Las Vegas |  Little Rock |  Los Angeles |  Louisville |  Memphis |  Miami |  Milwaukee |  Mobile |  Nashville |  New Orleans |  Norfolk |  Oklahoma City |  Philadelphia |  Phoenix |  Pittsburgh |  Portland |  Providence |  Raleigh |  Richmond |  Sacramento |  Saint Louis |  Salt Lake City |  San Antonio |  San Diego |  San Francisco |  Seattle |  Tampa |  West Palm Beach | 

© 2024 - Handyman.com